Model 332

The electrical force measuring devices of the model series TesT 332 with classic S-type shaping are used when high requirements meet rough environments. The transducers which are made of stainless steel are easily installable and well suited for tensile measurements.

Electrical Force Transducers – Model 332

• Capacities: 50kN to 200kN
• For tension
• Stainless steel
• Easy installation
• High accuracy
• Sensitivity: 2mV/V
• Also for dynamic applications
• Optional: TEDS module

The electrical force transducers of the model series 332 with a classic Sshaping are excellently suitable for tensile measurements and are used to meet high requirements under rough conditions. The force transducers that are made of stainless steel are easy to install. On demand you also receive model 332 with TEDS module inside the plug.

>> Technical data according to VDI / VDE directive 2638

• Zero signal when removed S0 mV/V 0,02
• Rated characteristic value Cnom mV/V 2
• Relative error of characteristic value dC % ≤ ± 0,1
• Relative linearity error dlin % ≤ ± 0,02
• Relative repeatability error in unchanged mounting position brg % ≤ ± 0,017
• Combined error Fcomb % ≤ ± 0,03
• Reference temperature Tref °C 21
• Rated temperature range BT,nom °C -10…+40
• Operating temperature range BT,G °C -15…+60
• Storage temperature range BT, S °C -20…+70
• Relative creep after 30 min K0,5 % ≤ ± 0,03
• Relative creep after 8 h K8 % ≤ ± 0,009
• Temperature effect on characteristic value per 10K TKC % ≤ ± 0,01
• Temperature effect on zero signal per 10K TK0 % ≤ ± 0,04
• Input resistance Re Ω 400 ± 25
• Output resistance Ra Ω 350 ± 2
• Insulation resistance Ris GΩ > 5
• Max. excitation voltage U V 15
• Rated range of excitation voltage BU, nom V 5…10
• Limit force FL % ≤ 150
• Breaking force FB % ≥ 300
• Max. permissable dynamic load 2) Ldy % ≤ 70
• Degree of protection acc. to DIN 60529 IP65