Mini inspektions lampe (200L)

Mini inspektions lampe (200L)

TECHNICAL DATA

Light Source High power COB LED
Luminous Power ca. 200 lumen ‒ High light
ca. 60 lumen ‒ Low light
ca. 120 lumen ‒ Top light
Operating time ca. 2h ‒ High light
ca. 6h ‒ Low light
ca. 3h ‒ Top light
Battery Specification Li-Ion 3.7 V, 700 mAh, 2.59 Wh
Charging Time ca. 2 h
Charging Input DC 5V 1A
Degree of protection IP 20 , IK 07
Operating temperature -10 °C to +40 °C

OPERATING & CHARGING PROCEDURE

• STYLO LAMP – Operating mode :
– Press the button for the first time, the upper LED lights up.
– Press the button a 2nd time, the main LED lights up at low intensity (60 Lm).
– Press the button a 3rd time, the main LED lights up at high intensity (200 Lm).
– Finally, press the lamp a 4th time to turn it off.
• Connect the lamp with the supplied USB charging cable to recharge it.
• A red LED lights up to indicate the charge.
• The charge is complete when this light turns green.
• If the charging indicator does not light up, disconnect and then reconnect USB cable.
• Always use the USB cable recommended for this lamp.
• Using a non-recommended cable can cause a fire and destroy the lamp
• Charge the lamp for 4-5 hours before first use.
• Charge the lamp to 100% before storing it for a long time

Klik her for at læse mere om Mini inspektions lampe (200L)