Kurv

Her kan du direkte bestille varer med betalingskort. Tryk ”Gå til betaling”, når du er klar til at bestille dine varer i kurven.
Ønsker du i stedet at sende os en forespørgsel, tryk ”Send forespørgsel”. Du vil snarest blive kontaktet af en medarbejder.

Varenr.
Produkt
Antal
Stk. pris
Netto pris/stk.
Total
Du har ingen varer i din kurv
Subtotal
0,00 kr.
Moms (25%)
0,00 kr.
Total
0,00 kr.
eller

Tak for din forespørgsel.

Du vil blive kontaktet af en teknisk konsulent i løbet af en arbejdsdag.

Dette er ikke en ordre, blot en forespørgsel.

Model series 113 – 114 – 115

Venligst kontakt os for pris.

Varenummer (SKU): Model-114

Model series 113 – 114 – 115

These testing machines are the stand-alone model series by TesT. The machines of model series 113 are suitable for measuring ranges between 50 kN and 100 kN. Model series 114 has been designed for ranges from 200 kN to 400 kN. Machines from series 115 are availbale for upper range values of 500 kN and 600 kN. The construction of these model series allows the use as calibration machine.

All universal testing machines of the model series TesT 106 – 115 will be equipped with the TesTController 850-USB that is TEDS compatible. The corresponding software TesTWinner® provides the user, besides to its free programmability, an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. According to all two-column testing machines by TesT the upper working space of the model 113 is also usable and just has to be selected previously in the software. In the standard version the upper working space is designed for loads of up to 20% of nominal load, an expansion to 100% can be realized on request. Time-consuming modifications can thus be eliminated. A wide application field is guaranteed by a comprehensive range of accessory.

Universal Testing Machines
Methodical Component and Materials Testing Model series 113 – 114 – 115

Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages. By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the resulting possibilities for financial penalties are minimised. In addition to a standard range of machines for materials testing TesT also supplies special models for component testing according to customer specifications. The associated TesTController 850 as well as the suitable software TesTWinner®

Dealing with forces and torques is dangerous. Therefore, the occupational safety is of prime importance at TesT. All universal testing machines by TesT will always be delivered with safety device
and electrical shut-off. All models are provided with safety contacts on the doors and firmly mounted rear panels. Doors and rear panels are made of impact resistant MACROLON® which does not splinter. This corresponds to the requirements of DIN 51233. By means of these measures accidents can be avoided and the relevant safety regulations of the EU are considered. All testing machines by TesT are provided with a CE mark and are supplied with the EU (CE) Declaration of conformity.

Konto-kunder, tryk her for log-in

Normal lagervare, forbehold for mellemsalg
Ring for pris og info
+45 43 200 300
Varenummer (SKU): Model-114

Specifikationer

Specifikationer

Kontakt Keld Svenning Hansen om
Model series 113 - 114 - 115
Keld Svenning Hansen
Produktchef
Ring på:
+45 20 124 960
Skriv til:
[email protected]
Modtag et opkald fra Keld
* Skal udfyldes

Vi har nu modtaget din anmodning

Du vil hurtigst muligt blive kontaktet af Keld.

Kontakt Lone Brandis om
Model series 113 - 114 - 115
Lone Brandis
Salgssupporter
Ring på:
+45 43 200 341
Skriv til:
[email protected]
Modtag et opkald fra Lone
* Skal udfyldes

Vi har nu modtaget din anmodning

Du vil hurtigst muligt blive kontaktet af Lone.