LD 3000: Brinell
Venligst kontakt os for pris.
LD 3000: Brinell
SERIE LD – BRINELL TESTING SOLUTIONS
ONLY INDENTATION
LD 3000: Brinell
Semi-automatic Brinell hardness tester. Reading of indentation is made through standard microscope or through optional electronic microscope with auto-measure.
LD 3000 INDENTATION READING
STANDARD MICROSCOPE: Supplied microscope for Brinell and Vickers indentation reading (20x, div. 0,01 mm, scale 6 mm).
BK20 (OPTIONAL): Electronic microscope for Brinell and Vickers indentation autoreading. Tablet with software
AUTOMATIC BRINELL HBW
LD 3000: Brinell A
Automatic Brinell hardness tester with on-board LCD and portable probe. Real Brinell HBW in compliance with ASTM E10 and ISO 6506.
LD 3000 A AUTOMATIC READING
The preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Indentation autoreading through camera and automatic readuot. Powerful software for test cycle managing and automatic indent analyzing. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.
AUTOMATIC BRINELL HBWT
LD 3000: Brinell B
Automatic Brinell hardness tester with depth hardness measurement for Brinell HBWT and Rockwell in compliance with ASTM E18 and ISO 6508. On-board LCD.
LD 3000 B AUTOMATIC MEASUREMENT
The preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Real Brinell HBW and Rockwell measurement in compliance with ASTM E18 E08 and ISO 6506 6508. Powerful software for test cycle managing. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.
HARDNESS TESTERS DETAILS
TEST LOADS: from 10 to 3000 kgf (From 98,07 to 29421 N)
FEASIBLE TESTS: (Depending on the models, for more information see the table at the bottom):
Brinell HBW: 1/10 – 1/30 – 2.5/62.5 – 2.5/187.5 – 5/25 – 5/62,5 – 5/125 – 5/250 – 5/750 – 10/100 – 10/250 – 10/500 – 10/1000 – 10/1500 – 10/3000
Brinell HBWT: 2.5/62.5 – 2.5/187.5 – 5/125 – 5/250 – 5/750 – 10/500 – 10/1000 – 10/1500 – 10/3000
Rockwell: HRA – HRB – HRC – HRD – HRF – HRG – HRL – HRM – HRR
Vickers HV 3 – HV 5 – HV 10 – HV: 20 – HV 30 – HV 50 – HV 100 (Only indentation)
- EASY AND FAST AUTOMATIC MEASUREMENTS:
Spin the leveling screw’s handle and bring your sample to make contact with the clamping hood blocking the piece. Press the START button and the measuring head approaches the sample, applies the load to perform the indentation and goes back upward; all in automatic succession without breaching a phase. - CLOSED LOOP TECHNOLOGY (Pat. AFFRI):
Load forces are applied through load cells and electronically controlled in “Closed Loop” with a frequency of 1 khz, assuring perfect linearity in every range. Range from 10 to 3000 Kgf. Results are not affected by any structural de ection, misalignment, vibration or problems associated with dead weight systems on traditional testers. The tester can also run in an inclined position. - SELF COMPENSATING AND CLAMPING SYSTEM (Pat. AFFRI).
When testing unstable samples or de ective parts, the AFFRI System will follow the sample and not lose contact, compensating any frame dflection during the test cycle. Accurate results are assured even with oiled, dusty or dirty pieces. - VERTICAL STROKE:
The measuring head with indenter has a vertical stroke of 30mm. The indenter head retracts into a protective cylinder at the end of the measurement cycle.
TECHNICAL FEATURES
|
LD 3000
|
|
|
Standards
|
EN-ISO 6506-1 / EN-ISO 6507 / EN-ISO 6508-2 / ASTM E-10 / ASTM E-18 / ASTM E-384 / ASTM E-92
|
|
Indenter and clamping-hood stroke
|
30 mm
|
|
Elevating screw stroke
|
150 mm. Removing the elevating screw, the vertical capacity increase till 300 mm for large samples.
|
|
Depth capacity
|
190 mm
|
|
Test loads
|
Brinell: 98.07 – 147.1 – 294.2 – 306.5 – 612.9 – 1839 – 2452 – 4903 – 7355 – 9807 – 29421 N (10 – 15 – 30 – 31.2 – 62.5 – 187.5 – 250 – 500 – 750 – 1000 – 3000 kgf) Rockwell (On request): 588.4 – 980.7 – 1471 N (60 – 100 – 150 kgf)
Vickers (On request): 98.07 – 147.1 -294.2 – 490.3 – 980.7 N (10 – 15 – 30 – 50 – 100 kgf)
|
|
Feasible tests
|
LD 3000: Only indentation
LD 3000 A: Automatic indentation reading with onboard LCD and portable probe LD 3000 B: Automatic Brinell HBWT and Rockwell measurements |
|
Load accuracy
|
Better than 0.05 %
|
Normal lagervare, forbehold for mellemsalg
